Home>Products>THK Linear Motion>HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series
HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series
category
THK Linear Motion
THK HSR15M1R5VVC1+[75-2500/1]L Bearing SPECIFICATIONS
- THK
HSR15M1R5VVC1+[75-2500/1]L
- Pillow Block
- 0.0
- N/A
- 9.988
- M06288
- 4
- V Lock
- 4 Bolt Pillow Block
- Genuine Pump Valve CO., LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series Specification details
- Pillow Block
- 0.0
- N/A
- 9.988
- M06288
- 4
- V Lock
- 4 Bolt Pillow Block
- Spherical Roller Bearing
- Cast Steel
- Non-expansion
- 5/8 Inch
- Yes
- 22216
- Triple Lip Urethane
- 1 Piece Solid
- Inch
- Double Row | Single Nut
- 4 Bolt Pillow Block; 2-3/4" Bore; 3-1/8" Base to Center Height; V Lock Mount; Spherical Roller Bearing; 8" Minimum Bolt Spacing; 9.6" Bolt Spacing Maximum; Relubricatable; Cast Ste
- 31171511
- 8483.20.40.80
- Bearing
- Pillow Block
- QVPR16V212SO
- 22
- 3.29 Inch | 83.566 Millimeter
- 8 Inch | 203.2Millimeter
- 9.6 Inch | 243.84Millimeter
- 2.75 Inch | 69.85 Millimeter
- 3.125 Inch | 79.38 Millimeter
- 0 Inch | 0Millimeter
- 8.8 Inch | 223 Millimeter
THK HSR15M1R5VVC1+[75-2500/1]L HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series Dimensions
Design Units | Imperial |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 646000 lbf |
Cage Type | Pin-Type |
G1 - Heat Generation Factor (Roller-Raceway) | 1100 |
C90 - Dynamic Radial Rating (90 million revolutions)5 | 96200 lbf |
Cone Part Number | EE380080 |
C0 - Static Radial Rating | 453000 lbf |
Cg - Geometry Factor | 0.179 |
B - Cone Width | 3.7500 in |
d | 8 in |
a - Effective Center Location4 | 1.35 in |
Aa - Cage-Cone Backface Clearance | 0.89 in |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 168000 lbf |
da - Cone Frontface Backing Diameter | 10.79 in |
db - Cone Backface Backing Diameter | 11.02 in |
G2 - Heat Generation Factor (Rib-Roller End) | 104 |
K - Factor8 | 0.67 |
C1 - Dynamic Radial Rating (1 million revolutions)6 | 371000 lbf |
R - Cone Backface To Clear Radius3 | 0.25 in |
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 143000 lbf |
HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series Interchange Guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | r | V | Z | C | D | H | R | T |
ZR3.25.2500.400-1SPPN | ISB | - | 33 mm | 124 mm | - | 2681 mm | 147 mm | - | - |
ZR3.32.2500.400-1SPPN | ISB | - | 39 mm | 122 mm | - | 2718 mm | 181 mm | - | - |
711002500 | INA | - | - | - | 14 mm | 40 mm | - | - | - |
2P25002 | NTN | - | - | - | 390,000 mm | 1750,000 mm | - | - | - |
2P25002K | NTN | - | - | - | 390,000 mm | 1750,000 mm | - | - | - |
SE25003 | NTN | - | - | - | 218,000 mm | 1750,000 mm | - | - | - |
ER1.50.2500.400-1SPPN | ISB | - | - | 151 mm | - | 2790 mm | 164 mm | - | - |
ER3.25.2500.400-1SPPN | ISB | - | 33 mm | 152 mm | - | 2786,4 mm | 147 mm | - | - |
ER3.32.2500.400-1SPPN | ISB | - | 39 mm | 154 mm | - | 2822,4 mm | 181 mm | - | - |
DAC448250037 | ISO | - | - | - | 37 mm | 82,5 mm | - | - | - |
72213C/72500 | Timken | 3,3 mm | - | - | 25,4 mm | 127 mm | - | 3,5 mm | 36,512 mm |
HSR25A1M(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | Designation Ruville:7712; Bearing number:CX234; Designation FAG:713623030; Designation SKF:VKBA 3219; |
HSR25A1UU(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | D1:119.1 mm; Long Description:65MM Bore; Shaft Mou; Calculation factor kr:0.05; UNSPSC:31171532; D:140 mm; Calculation factor - kr:0.05; internal clearance:C0; bore diameter:65 mm; D1 ≈:119.1 mm; Inner Race Width:1.89 Inch | 48 Milli; d1 ≈:86 mm; closure type:Open; static load capacity:3 |
HSR20R1UUM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | Ew:90 mm; d1:70,8 mm; B:25 mm; Bore Diameter (mm):55; Ba:22,2 mm; Weight:0,56 Kg; X:17 mm; Basic dynamic load rating (C):117 kN; Size (mm):55x90x25; Width (mm):25; Bearing number:RN2211-E-MPBX; d:55 mm; Outer Diameter (mm):90; Basic static load rating (C0):118 kN; r min.:1,5 mm; |
HSR25A1UUM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | dh:112 mm; Bore Diameter (mm):80; r min.:0,6 mm; Outer Diameter (mm):120; Weight:0,74 Kg; Bearing number:CRBH 8016 A; d:80 mm; B:16 mm; Basic dynamic load rating (C):32,1 kN; Width (mm):16; Size (mm):80x120x16; ds:88 mm; D:120 mm; |
HSR25A1SS(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | C:170 mm; Size (mm):360x650x170; D:650 mm; Outer Diameter (mm):650; B:170 mm; Width (mm):170; Bearing number:NJ2272; d:360 mm; Bore Diameter (mm):360; |
HSR25A1(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | r - Cup Frontface To Clear Radius2:0.03 in; d:3.1490 in; B - Cone Width:1.4212 in; db - Cone Backface Backing Diameter:3.74 in; Y1 - ISO Factor9:1.67; Ab - Cage-Cone Frontface Clearance:0.1 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:80900 lbf; Cone Part Number:578; Aa - Cage-Co |
HSR25A1SSM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | D1:669,3 mm; Weight:711 Kg; Reference speed:320 r/min; Calculation factor (Y1):1,8; Fatigue load limit (Pu):990; Width (mm):280; D:790 mm; Basic dynamic load rating (C):7100 kN; Calculation factor (Y0):1,76; ba min.:17 mm; db min:469 mm; Dm:560 mm; Bearing number:23288-B-K-MB+H3288; B:280 mm; I:361 |
HSR20R1UU(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | da min.:68,5 mm; Weight / LBS:1.757; Category:Angular Contact Ball; outside diameter:110 mm; Noun:Bearing; Flush Ground:No; d:60 mm; r1a max:1 mm; Static load, C0:44.5 kN; row type & fill slot:Single-Row Non-Fill; contact angle:40 °; Dynamic load, C:56 kN; UNSPSC:31171531; Cage Material:Steel; r |
HSR15M1R5VVC1+[75-2500/1]L THK Medium to Low Vacuum Linear Guide Accuracy and Preload Selectable HSR-M1VV Series Video
THK HSR15M1R5VVC1+[75-2500/1]L INTERCHANGE
THK Linear Motion Part series HSR15M1R5VVC1+[75-2500/1]L is a potential replacement for these common bearing part numbers:
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
HSR15M1R5VVC1+[75-2500/1]L
Contact Us
- Genuine Pump Valve CO., LTD.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 69876-7604, U.S.A.
- Phone(Working Time)+1-853-836-7765
- Fax
THK HSR15M1R5VVC1+[75-2500/1]L Technical Articles
Can you replace main bearings without removing crank? |
How do pillow block bearings work? |
How do you check if your front wheel bearings are bad? |
THK Linear Motion CATEGORIES
- Parker PV2 Series Pump
- Parker T Series Pump
- Parker SQP Pump
- Parker VQ Pump
- Parker VTM42 Pump
- Parker Gear Pump CB
- Parker Vane Pump
- Parker Piston Pump PV Series
- Parker Motor F11 Series Pump
- Parker Motor F12 Series Pump
- Parker Piston Pump PAVC Series
- FAG BEARING
- IKO BEARING
- KOYO BEARING
- NSK BEARING
- NTN BEARING
- SKF BEARING
- TIMKEN BEARING
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valve
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valves
- REXROTH Directional poppet valves
- REXROTH Check valves
- REXROTH Throttle valves
- REXROTH Pressure relief valve
- REXROTH Pressure reducing valve
- REXROTH Directional spool valves
- 37425 Bearing
- Timken Lm102949 Bearing
- M84510 Bearing
- Jm511945 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Bearing Slewing Ring
- Kaydon Slewing Bearing
- THK Linear Guide
- THK Miniature Linear Guide
- THK Linear Guide Rails
- High Temperature Linear Guide
- Curved Linear Guide
- THK Linear Bearings And Rails
- THK Linear Motion
- Deep Groove Ball Bearings
- Sealed Spherical Roller Bearings Continuous Casting Plants
- Full Complement Cylindrical Roller Bearings
- Single-row Cylindrical Roller Bearings
Customers Who Viewed THK HSR15M1R5VVC1+[75-2500/1]L Bearing Also Viewed
- HSR25A1SS(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series
- HSR25A1UUM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series
- HSR25A1UU(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series
- HSR25A1SSM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series
- HSR25A1M(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series